VIDEO:
30 SECOND
PART BUILDER
EXPLAINED
- SMC Home
- Sensors, Switches & Controllers
- Vacuum/Compound Pressure Sensors
- Pneumatic Sensors
- Integrated Display
- ZSE10(F), Digital Vacuum Sensor, 1 Output with Analog, Compact
ZSE10(F), Digital Vacuum Sensor, 1 Output with Analog, Compact
ZSE10(F) is a compact vacuum sensor suitable for mounting in panels or tight spaces. This sensor has an integrated alphanumeric LED display with red and green LED switch indicators. Switch delay time is 2.5ms, while current consumtion is 40mA. Two sensing ranges are available, including low vacuum and compound pressure, consisting of low vacuum and pressure. An auto-preset function helps optimize the switch setpoint. ZSE10(F) meets UL/CSA, CE and RoHS standards, and has an IP40 enclosure rating.
- Low profile height, under 10mm, for tight spaces
- 3-step setting and function selection modes
- 7 displayable units: MPa, kPa, kgf/cm2, bar, psi, inHg, mmHg
- 1 switch output (NPN or PNP) plus 1 analog voltage output, or 2 switch outputs
- Port sizes: M5 (female), 1/8 Rc (male), 1/8 NPT (male)
- Bracket or panel mounting options
How to order
Piping port
Piping port
R1/8
Piping adapter
NPT1/8
Piping adapter
How to Order
Series ZSE10
(
F
)
/ISE10
For vacuum/
compound pressure
ISE10
For positive pressure
M5 A M
ZSE10 M5 B M
Rated pressure range
ISE10
–0.100 to 1.000 MPa
Rated pressure range
ZSE10
ZSE10F
0.0 to –101.0 kPa
–100.0 to 100 kPa
Option 1
Without lead wire
Lead wire with connector (Lead wire length: 2 m)
With connector cover
G
Nil
Option 3
Symbol Calibration certificate
Nil
K
—
p
With unit switching function
Note 1)
Fixed SI unit
Note 2)
With unit switching function
Note 1)
(Initial value psi)
Nil
M
P
Unit specifications
Note 1) Under the New Measurement Law,
sales of switches with the unit switch-
ing function are not allowed for use in
Japan.
Note 2) Fixed unit:
For vacuum/compound pressure: kPa
For positive pressure: MPa
Option 2
None
Panel mount adapter +
Front protective cover
D
Note 3)
DIN rail adapter
Note 5)
R
Note 4)
Nil
Piping specifications
M5 female thread/Side ported
M5 female thread/Rear ported
M5
M5R
R1/8/Side ported
01
∗
NPT1/8/Side ported
N01
∗
Digital Pressure Switch
Options/Part No.
When optional parts are required separately, use the following part numbers to place an order.
ZS-39-5G
ZS-39-B
ZS-39-D
ZS-39-R
Lead wire with connector (with connector cover) (5 cores, 2 m)
Panel mount adapter
Panel mount adapter + Front protective cover
DIN rail adapter
Part no. Option
ZS-39-01
ZS-39-N1
∗
ZS-39-N2
∗
Front protective cover
R1/8 piping adapter
NPT1/8 piping adapter
Part no. Option
Output specifications
NPN open collector 2 outputs
PNP open collector 2 outputs
NPN open collector 1 output + Analog voltage
PNP open collector 1 output + Analog voltage
A
B
C
∗
E
∗
∗ Made to Order
∗ Made to Order
Note 3) Not available for piping specifications of 01 and N01.
Note 4) Not available for piping specifications of M5R, 01 and N01.
Note 5) The DIN rail needs to be prepared by the customer.
∗ Made to Order
®
1
Related Products
Email Part
Email How to Order Page
Products
- Actuators
-
Directional Control Valves
- Directional Control Valves Overview
- Solenoid Valves - 4 & 5 Port
- Solenoid Valves - 3 Port
- Solenoid Valves - Direct Operated
- Industrial Communication
- Air Operated Valves
- Mechanical & Hand Operated Valves
- Safety Pressure Relief Valves
- Solenoid Valves - ISO
- Clean Room Products
- Valve Manifold Configurator
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Vacuum Products
- Industrial Communication
- Sensors & Switches
- Fluid Process
- Static Control
- Electric Actuators
- Chillers
- Process Gas Equipment
- High Vacuum
- Chemical Handling Equipment
- Secondary Battery