VIDEO:
30 SECOND
PART BUILDER
EXPLAINED
- SMC Home
- Sensors, Switches & Controllers
- Positive Pressure Sensors
- Pneumatic Sensors
- Electronic Switches
- PS1000, Compact Electronic Pressure Switch with Fitting Plug, LED Indicator
PS1000, Compact Electronic Pressure Switch with Fitting Plug, LED Indicator
PS1000 is a compact pressure switch providing a digital output signal. The switch is set with a trimmer rotating through a 220 of range using a precision screwdriver. A red LED lights up when the output signal is ON. Insert the switch port into a one touch fitting to monitor pressure. The PS1000 monitors positive pressure, with the signal ON when pressure is above the set point. The PS1000 can measure the pressure of any non-corrosive, non-flammable gas. PS1000 is RoHS and optionally CE compliant, with an IP40 enclosure.
- Compact pressure switch with manual rotary adjustment of a digital output signal
- Positive pressure range: -0.1 to 0.45 MPa
- Power supply requirement: 12 to 24 VDC
- Repeatability: ±1% of F.S.
- Piping options: ø6mm to ø1/4" plug for fittings
- Molded 3 meter, 2-wire cable compatible with NPN and PNP wiring
How to order
SMC Corporation of America
10100 SMC Blvd., Noblesville, IN 46060
www.smcusa.com
SMC Pneumatics (Canada) Ltd.
www.smcpneumatics.ca
(800) SMC.SMC1 (762-7621)
e-mail: sales@smcusa.com
For International inquiries: www.smcworld.com
© 2012 SMC Corporation of America, All Rights Reserved.
All reasonable efforts to ensure the accuracy of the information detailed in this catalog were made at the time of publishing. However, SMC can in no way warrant the information herein contained as specifications are subject to change without notice.
QX-RRD-5M
How to Order
Switch Specifications
Set pressure
PS1000/PS1100 PS1200
t
psi (MPa)
PS1000 ON
OFF
PS1100 ON
OFF
58 (0.4)
29 (0.2)
0
–14.5 (–0.1)
Set pressure
t
psi (kPa)
PS1200 ON
OFF
0
–7.25 (–50)
–14.5 (–100)
RoHS
[Option]
QR06 LPS 0010
Output specifications
10
11
12
For positive pressure
For vacuum and residual pressure
For vacuum
Piping specifications
R06
R07
ø6 reducer
1/4" reducer
L
3 m
Lead wire length
The PS1200 series is CE-
compliant (with Q) only.
Option (CE-compliant
)
Nil
Q
None
CE-compliant
Use the pressure setting trimmer to set
ON pressure.
Rotate clockwise to increase the set
pressure. For setting vacuum, rotate
counterclockwise.
To set, use a flat head screwdriver
suited for the groove of the trimmer,
and rotate it lightly with finger tip.
Rotation angle of the trimmer is 220.
There is a stop provided to prevent the trimmer from rotating beyond its limits.
Rotation beyond the limit can damage the trimmer. Adjust the trimmer gently
within the rotation angle.
+–
High
pressure
High
vacuum
Pressure setting
trimmer
220
Left end adjustment limit Right end adjustment limit
Setting of Pressure Switch
Trimmer
-
+
30
25.5
13
3000
Pressure setting trimmer
LED indicator
PS1000-R06L
MADE IN JAPAN
G
AIRCHECKER
30
A
10
ø6 reducer
1/4" reducer
Dimensions
KQ2H/L/T/S/Y06-M5
KQ2H/L07-M5
Other Series KQ2/KS
Series KJ
Dimensions
A
16
16
13
16
Applicable One-touch fittings
The switch turns ON
when the set
pressure is reached
or exceeded.
The switch turns ON
when at the set
pressure or below.
The switch turns
ON when at the
set pressure or
below.
Addition of PS1200 (For vacuum)
QS
Revision history
Edition B
Related Products
Email Part
Email How to Order Page
Products
- Actuators
-
Directional Control Valves
- Directional Control Valves Overview
- Solenoid Valves - 4 & 5 Port
- Solenoid Valves - 3 Port
- Solenoid Valves - Direct Operated
- Industrial Communication
- Air Operated Valves
- Mechanical & Hand Operated Valves
- Safety Pressure Relief Valves
- Solenoid Valves - ISO
- Clean Room Products
- Valve Manifold Configurator
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Vacuum Products
- Industrial Communication
- Sensors & Switches
- Fluid Process
- Static Control
- Electric Actuators
- Chillers
- Process Gas Equipment
- High Vacuum
- Chemical Handling Equipment
- Secondary Battery