VIDEO:
30 SECOND
PART BUILDER
EXPLAINED
FH150, Hydraulic Oil Filter
FH series suction filters are compact and lightweight. Designed with an aluminum casted housing. Element can be replaced by simply opening the cover to detach the element without touching the pipes. The filter can be fitted with a differential pressure indicator which senses when the element is becoming dirty, facilitating maintenance and helping to avoid pump damage such as cavitations. The FHG series suction guard was designed to prevent collected dust from falling into the tank. Since all dust is eliminated during trial operation, it is not necessary to replace flushing oil. Options include differential pressure indicator, differential pressure indication switch, air breezer, and cap.
- Compact and lightweight due to an aluminum alloy cover
- Paper or micromesh element slides into place, making it easy to install and remove
- Differential pressure indicator or differential pressure indication switch can be selected
- Hydraulic fluid: Petroleum, water-glycol, emulsion, and phosphoric ester
- Non-standard filtration available
How to order
N
W
V
Replacement O-ring/Seal List (One each of the seal
and O-ring types listed below are required per filter.)
FH150 Series
Port
size
02 to 04
02
to 04
Applicable
hydraulic fluid
Petroleum,
Water-glycol,
Emulsion
Phosphoric ester
Material
NBR
-70
-1
FKM
-70
q O-ring
order no.
(Nominal size)
KA00052
(C65)
KA01174
(C65)
w O-ring
order no.
(Nominal size)
KA00471
(P30)
KA00104
(P30)
0 1 002 P 005
02
03
04
1/4
3/8
1/2
Port size (Rc)
Differential pressure indication
1
None
Relief valve
B
Nil
None
With bracket
Bracket
005
010
020
5 µm
10 µm
20 µm
Nominal filtration
P
M
∗
Paper
Micromesh
Element
Replacement Element Part No. (Including O-ring for element)
Model
FH150-02
FH150-03
FH150-04
5
µ
m
EP910-005N
10
µ
m
EP910-010N
20
µ
m
EP910-020N
Element size
ø55 x 90
Note 1) The symbol at the end of the element part no. indicates the hydraulic fluid type.
N: Petroleum, V: Phosphoric ester, W: Water-glycol, Emulsion (10 µm only)
Note 2) Refer to page 528 for micromesh elements.
Note 3) Above elements require one element per filter.
Oil filter
How to Order
0
4
5
None
Differential pressure indicator
Differential pressure indication switch
Note)
Note) N.C. and N.O. common
Note)
Click here for details
Note) The paper elements for water-glycol or
emulsion is 10 µm only.
Hydraulic fluid
0
1
2
Petroleum
Water-glycol, Emulsion
Phosphoric ester
Construction/Seal List
Made to Order
Nil
X0
None (Standard)
Micromesh element equipped
Blanking cap
Cover
Case
Clamp ring
Element
q
O-ring
w
O-ring
IN
OUT
Spring
Differential pressure
indicator
Differential pressure
indicator
IN
OUT
Differential
pressure
indication switch
Differential pressure
indication switch
IN OUT
FH150
Hydraulic filter
Note)
The material and nominal size notations are based on JISB2401.
∗ The micromesh element is a made
to order specification (X0).
Note)
N, W and V refer to the hydraulic fluid symbol indicated at the end of the element part number.
522
C
Related Products
Email Part
Email How to Order Page
Products
- Actuators
-
Directional Control Valves
- Directional Control Valves Overview
- Solenoid Valves - 4 & 5 Port
- Solenoid Valves - 3 Port
- Solenoid Valves - Direct Operated
- Industrial Communication
- Air Operated Valves
- Mechanical & Hand Operated Valves
- Safety Pressure Relief Valves
- Solenoid Valves - ISO
- Clean Room Products
- Valve Manifold Configurator
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Vacuum Products
- Industrial Communication
- Sensors & Switches
- Fluid Process
- Static Control
- Electric Actuators
- Chillers
- Process Gas Equipment
- High Vacuum
- Chemical Handling Equipment
- Secondary Battery